Building Windows Media Service Cluster using LVS

From LVSKB
Revision as of 17:21, 13 July 2006 by James (Talk | contribs) (→‎Configuration Example)

Jump to: navigation, search

Introduction

Microsoft Windows Media Service uses uses two streaming media protocols to deliver content as a unicast stream to clients:

  • Real Time Streaming Protocol (RTSP)
  • Microsoft Media Server (MMS) protocol


Architecture

Configuration Example

In order for us to get this to work, we need to allow the following ports in:

  • 80 tcp (ONLY NEEDED IF YOU ARE SERVING STREAMS THROUGH HTTP)
  • 554 tcp/udp
  • 1755 tcp/udp
  • 1024-5000 udp


This can be done like so, replacing $EXT_IF and $EXT_IP with your appropriate interface and IP:

  • iptables -A INPUT -i $EXT_IF -p tcp -s 0/0 -d $EXT_IP --dport 1755 -j ACCEPT
  • iptables -A INPUT -i $EXT_IF -p tcp -s 0/0 -d $EXT_IP --dport 554 -j ACCEPT
  • iptables -A INPUT -i $EXT_IF -p udp -s 0/0 -d $EXT_IP --dport 554 -j ACCEPT
  • iptables -A INPUT -i $EXT_IF -p udp -s 0/0 -d $EXT_IP --dport 1024:5000 -j ACCEPT


(example: iptables -A INPUT -i eth0 -p tcp -s 0/0 -d 1.2.3.4 --dport 1755 -j ACCEPT)


Next, we need to take a group the packets by using the MANGLE table in iptables. To do that you would do the following, replacing $EXT_IF, $EXT_IP and $WMS_MARK with your appropriate interface, IP and mark that you would like to tag the packets with:

  • iptables -t mangle -A PREROUTING -i $EXT_IF -p tcp -s 0/0 -d $EXT_IP --dport 554 -j MARK --set-mark $WMS_MARK
  • iptables -t mangle -A PREROUTING -i $EXT_IF -p udp -s 0/0 -d $EXT_IP --dport 554 -j MARK --set-mark $WMS_MARK
  • iptables -t mangle -A PREROUTING -i $EXT_IF -p tcp -s 0/0 -d $EXT_IP --dport 1755 -j MARK --set-mark $WMS_MARK
  • iptables -t mangle -A PREROUTING -i $EXT_IF -p udp -s 0/0 -d $EXT_IP --dport 1755 -j MARK --set-mark $WMS_MARK
  • iptables -t mangle -A PREROUTING -i $EXT_IF -p udp -s 0/0 -d $EXT_IP --dport 1024:5000 -j MARK --set-mark $WMS_MARK


(example: iptables -t mangle -A PREROUTING -i eth0 -p tcp -s 0/0 -d 1.2.3.4 --dport 554 -j MARK --set-mark WMSLVS1)


Next, we need to tell LVS to do the load balancing. This can be done by doing the following, replacing $WMS_MARK and $RSx_IP with the appropriate mark that you chose above and your real server IPs:

  • ipvsadm -D -f $WMS_MARK
  • ipvsadm -A -f $WMS_MARK -s rr -p 600
  • ipvsadm -a -f $WMS_MARK -r $RS1_IP:0 -m
  • ipvsadm -a -f $WMS_MARK -r $RS1_IP:0 -m


(example: ipvsadm -A -f WMSLVS1 -s rr -p 600)
(example: ipvsadm -a -f WMSLVS1 -r 10.10.10.1:0 -m)



Once you have completed these steps, you should have a working Windows Media Streaming Server LVS! Enjoy!

Conclusion

References


LVS.png "Building Windows Media Service Cluster using LVS" is an LVS Example related stub. You can help LVSKB by expanding it
Retrieved from "https://kb.linux-vs.org/wiki?title=Building_Windows_Media_Service_Cluster_using_LVS&oldid=3404"